VACUUM SWITCHING VALVE(for Engine Mounting) REMOVAL

PROCEDURE


  1. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  2. REMOVE INLET AIR CLEANER ASSEMBLY

    Click here

  3. REMOVE AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE

    Click here

  4. REMOVE VACUUM SWITCHING VALVE (for Active Control Engine Mount System)


    1. B006X3W

      Remove the bolt and disengage the wire harness clamp to separate the engine wire.

    2. B0070O8

      Remove the 2 bolts.

    3. Disengage the wire harness clamp and disconnect the vacuum switching valve (for active control engine mount system) connector.

    4. B006Y4B

      Disconnect the 3 vacuum hoses from the vacuum switching valve (for active control engine mount system).

    5. Remove the nut and vacuum switching valve (for active control engine mount system) from the front engine mounting insulator.