ACTIVE CONTROL ENGINE MOUNT(for Rear Side) ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

Tech Tips

Refer to Problem Symptoms Table.

Click here

PROCEDURE


  1. INSPECT REAR ENGINE MOUNTING INSULATOR


    1. B004I14

      Disengage the clamp to separate the vacuum hose.

    2. Disconnect the vacuum hose.

    3. B004JQ7

      Using a vacuum pump, apply vacuum of 80 kPa (600 mmHg, 23.6 in.Hg) and wait for 1 minute.

    4. Check that there is no change in the needle movement of the vacuum pump gauge.

      OK
      Vacuum pressure holds.

    5. Check that there is no fluid leakage caused by a break in the diaphragm.

    6. Connect the vacuum hose.

    7. Engage the clamp to install the vacuum hose.