IGNITION COIL AND SPARK PLUG INSTALLATION

CAUTION / NOTICE / HINT

Note

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here

PROCEDURE


  1. INSTALL SPARK PLUG

    Click here

  2. INSTALL IGNITION COIL ASSEMBLY

    Tech Tips

    Perform "Inspection After Repair" after replacing an ignition coil assembly.

    Click here


    1. Using an 8 mm socket wrench, install the 4 ignition coil assemblies to the cylinder head cover sub-assembly with the 4 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Note

      If an ignition coil assembly has been struck or dropped, replace it.

      Tech Tips

      Install the same parts to their original positions.

    2. Connect the 4 ignition coil assembly connectors.

  3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  4. PERFORM INITIALIZATION


    1. Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug.

      Click here