SFI SYSTEM(w/o Canister Pump Module) HOW TO PROCEED WITH TROUBLESHOOTING

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tech Tips

*: Use the GTS.

PROCEDURE


  1. VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT

    NEXT

  2. CUSTOMER PROBLEM ANALYSIS

    Result
    Proceed to
    NEXT

    NEXT

  3. CONNECT GTS TO DLC3*

    Tech Tips

    If the display indicates a communication malfunction, inspect the DLC3.

    When any CAN communication system DTCs are output, perform troubleshooting for the CAN communication system first.

    Result
    Proceed to
    NEXT

    NEXT

  4. CHECK DTC AND FREEZE FRAME DATA*


    1. Check for DTCs.


      Powertrain > Engine > Trouble Codes

    2. Check for Freeze Frame Data.

      Click here

      Tech Tips

      Record or print DTCs and Freeze Frame Data if necessary.

      Result
      Proceed to
      NEXT

    NEXT

  5. CHECK VEHICLE CONTROL HISTORY AND VEHICLE CONTROL HISTORY FREEZE FRAME DATA*


    1. Check for Vehicle Control History and Vehicle Control History Freeze Frame Data.


      Powertrain > Engine > Utility
      Tester Display
      Vehicle Control History

      Tech Tips

      Print Vehicle Control History and Vehicle Control History Freeze Frame Data if necessary.

      Result
      Proceed to
      NEXT

    NEXT

  6. CLEAR DTC AND FREEZE FRAME DATA*


    1. Clear the DTCs and Freeze Frame Data.


      Powertrain > Engine > Clear DTCs
      Result
      Proceed to
      NEXT

    NEXT

  7. CONDUCT VISUAL INSPECTION

    Result
    Proceed to
    NEXT

    NEXT

  8. SELECT CHECK MODE DIAGNOSIS*


    1. Change the ECM from normal mode to check mode.


      Powertrain > Engine > Utility
      Tester Display
      Check Mode
      Result
      Proceed to
      NEXT

    NEXT

  9. CONFIRM PROBLEM SYMPTOMS


    1. Confirm the problem symptoms.

      Tech Tips

      If the engine does not start, first perform the "Check DTC" procedure and "Conduct Basic Inspection" procedure below.

      Result
      Result Proceed to
      Malfunction does not occur A
      Malfunction occurs B

    B

    GO TO STEP 11 Click here

    A

  10. SIMULATE SYMPTOMS

    Tech Tips

    Refer to Symptom Simulation.

    Click here

    Result
    Proceed to
    NEXT

    NEXT

  11. CHECK DTC*


    1. Check for DTCs.


      Powertrain > Engine > Trouble Codes
      Result
      Result Proceed to
      DTCs are output A
      DTCs are not output B

    B

    GO TO STEP 13 Click here

    A

  12. REFER TO DTC CHART

    Tech Tips

    Refer to Diagnostic Trouble Code Chart.

    Click here

    Result
    Proceed to
    NEXT

    NEXT

  13. CONDUCT BASIC INSPECTION


    1. Conduct basic inspection.

      Click here

      Result
      Result Proceed to
      Malfunctioning parts not confirmed A
      Malfunctioning parts confirmed B

    B

    GO TO STEP 18 Click here

    A

  14. REFER TO PROBLEM SYMPTOMS TABLE

    Tech Tips

    Refer to Problem Symptoms Table.

    Click here

    Result
    Result Proceed to
    Malfunctioning circuit confirmed A
    Malfunctioning parts confirmed B

    B

    GO TO STEP 18 Click here

    A

  15. CHECK ECM POWER SOURCE CIRCUIT


    1. Check the ECM power source circuit.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  16. CONDUCT CIRCUIT INSPECTION

    Result
    Result Proceed to
    Malfunction not confirmed A
    Malfunction confirmed B

    B

    GO TO STEP 19 Click here

    A

  17. CHECK FOR INTERMITTENT PROBLEMS


    1. Check for intermittent problems.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  18. CONDUCT PARTS INSPECTION

    Result
    Proceed to
    NEXT

    NEXT

  19. IDENTIFY PROBLEM

    Result
    Proceed to
    NEXT

    NEXT

  20. ADJUST AND/OR REPAIR

    Result
    Proceed to
    NEXT

    NEXT

  21. CONDUCT CONFIRMATION TEST

    Result
    Proceed to
    NEXT

    NEXT

    END