SFI SYSTEM(w/o Canister Pump Module) PARTS LOCATION
ILLUSTRATION
| *1 | FRONT ENGINE MOUNTING INSULATOR | *2 | FUEL PUMP (for Low Pressure Side) |
| *3 | MASS AIR FLOW METER SUB-ASSEMBLY | *4 | PARK / NEUTRAL POSITION SWITCH ASSEMBLY |
| *5 | VACUUM SWITCHING VALVE (for Active Control Engine Mount System) | *6 | NO. 1 ENGINE ROOM RELAY BLOCK AND NO. 1 JUNCTION BLOCK ASSEMBLY |
| *7 | FUEL PUMP CONTROL ECU | *8 | ECM |
| *9 | FLOW SHUTTING VALVE (for ATF Control) (NO. 1 WATER BY-PASS HOSE) | *10 | FLOW SHUTTING VALVE (for Heater Control) (WATER BY-PASS HOSE ASSEMBLY) |
| *11 | REAR ENGINE MOUNTING INSULATOR | - | - |
ILLUSTRATION
| *1 | AIR FUEL RATIO SENSOR (Sensor 2) | *2 | ENGINE COOLANT TEMPERATURE SENSOR |
| *3 | PORT FUEL INJECTOR ASSEMBLY | *4 | FUEL PRESSURE SENSOR (FUEL DELIVERY PIPE WITH SENSOR ASSEMBLY) (for Low Pressure Side) |
| *5 | VACUUM SWITCHING VALVE (PURGE VSV) | *6 | WATER INLET WITH THERMOSTAT SUB-ASSEMBLY |
| *7 | THROTTLE BODY WITH MOTOR ASSEMBLY | *8 | CRANKSHAFT POSITION SENSOR |
| *9 | DIRECT FUEL INJECTOR ASSEMBLY | - | - |
ILLUSTRATION
| *1 | CAM TIMING OIL CONTROL SOLENOID ASSEMBLY | *2 | CAM TIMING CONTROL MOTOR WITH EDU ASSEMBLY |
| *3 | EGR VALVE ASSEMBLY | *4 | FUEL PRESSURE SENSOR (for High Pressure Side) |
| *5 | KNOCK CONTROL SENSOR | *6 | MANIFOLD ABSOLUTE PRESSURE SENSOR |
| *7 | ENGINE WATER PUMP ASSEMBLY (WATER INLET HOUSING) | - | - |
ILLUSTRATION
| *1 | AIR FUEL RATIO SENSOR (Sensor 1) | *2 | ENGINE OIL TEMPERATURE SENSOR |
| *3 | FUEL PUMP ASSEMBLY (for High Pressure Side) | *4 | OIL PRESSURE CONTROL VALVE ASSEMBLY |
| *5 | CAMSHAFT POSITION SENSOR (for Intake Camshaft) | *6 | CAMSHAFT POSITION SENSOR (for Exhaust Camshaft) |
| *7 | IGNITION COIL ASSEMBLY | *8 | OIL PRESSURE SENSOR (OIL PRESSURE SENDER GAUGE ASSEMBLY) |
ILLUSTRATION
| *1 | ACCELERATOR PEDAL SENSOR ASSEMBLY | *2 | TRANSMISSION CONTROL SWITCH (SHIFT LOCK CONTROL UNIT ASSEMBLY) |
| *3 | STOP LIGHT SWITCH ASSEMBLY | *4 | COMBINATION METER ASSEMBLY |
| *5 | DLC3 | *6 | ENGINE STOP AND START ECU |