SFI SYSTEM(w/o Canister Pump Module) PRECAUTION


  1. INITIALIZATION

    Note


    • Before replacing the ECM, refer to Service Bulletin (for Immobiliser System).

    • Perform Registration (VIN or frame number registration) after replacing the ECM.

      Click here

    • Perform Learning Value Reset and Idle Learning after replacing or servicing parts related to engine operation.

      Click here

    • Make sure to perform Reset Memory (A/T initialization), when replacing the ECM.

      Click here

    • When the cable is disconnected from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected.

      System Name See Procedure
      Lane Departure Alert System (w/ Steering Control)

      Click here

      Parking Assist Monitor System
      Pre-collision System

  2. WHEN USING GTS

    CAUTION:

    Observe the following items for safety reasons:


    • Before using the GTS, read the instruction manual.

    • Prevent the GTS cable from being caught on the pedals, shift lever or steering wheel when driving with the GTS connected to the vehicle.

    • When driving the vehicle for testing purposes using the GTS, 2 persons are required. One drives the vehicle, and the other operates the GTS.