CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)


    1. B0071VM

      Disconnect the camshaft position sensor connector.

    2. Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

      Note

      If the camshaft position sensor has been struck or dropped, replace it.

  2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  3. REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)


    1. B006XYC

      Disconnect the camshaft position sensor connector.

    2. Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

      Note

      If the camshaft position sensor has been struck or dropped, replace it.