2AR-FE BATTERY INSTALLATION

PROCEDURE


  1. INSTALL BATTERY


    1. Install the battery to the vehicle.

    2. B006XZX

      Install the No. 2 battery clamp with the bolt to the battery clamp sub-assembly.

      Torque:
      18.5 N*m  { 189 kgf*cm, 14 ft.*lbf }

    3. Connect the cable to the positive (+) battery terminal and tighten the nut.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    4. Engage the 2 claws to install the battery terminal cap to the positive (+) battery terminal.

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


    1. Connect the cable to the negative (-) battery terminal and tighten the nut.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click here