Click here

FRONT WIPER RUBBER INSTALLATION

Click here
Click here

CAUTION / NOTICE / HINT

Note:

Make sure to hold the front wiper arm while lifting it as lifting the front wiper arm by the front wiper blade may damage or deform the front wiper blade.

Tip:

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

Click here

PROCEDURE


  1. Click here

    INSTALL WIPER RUBBER


    1. B004HHAC01
      B006ZFL Install in this Direction

      Install the 2 front wiper rubber backing plates to the wiper rubber.

      Note:

      • Align the protrusions on the wiper rubber and the notches of the backing plates.

      • Align the curves of the backing plates and the windshield glass.

    2. B004J5SC01
      B006ZFL Install in this Direction

      Install the wiper rubber with the front wiper rubber backing plates to the front wiper blade as shown in the illustration.

      Note:

      Push the wiper rubber and front wiper backing plates into the front wiper blade strongly to engage them securely.

  2. Click here

    INSTALL FRONT WIPER BLADE


    1. B004ML1C01
      B006ZFL Install in this Direction

      Install the front wiper blade to the front wiper arm as shown in the illustration.

    2. B004MLCC01
      *a Holder
      B006ZFL Install in this Direction

      Pull down the holder of the front wiper blade.

    3. Turn the ignition switch to on.

    4. Operate the windshield wiper switch assembly to return the front wiper arm and blade assemblies to their original position.

    5. Turn the ignition switch off.