AIR CONDITIONING FILTER REMOVAL

PROCEDURE


  1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for Type A)


    1. B004LM4C01
      *1 Glove Compartment Door Stopper Sub-assembly
      *a Stopper

      Disengage the claw to disconnect the glove compartment door stopper sub-assembly.

    2. Slightly bend stoppers (A) and (B) in the directions indicated by the arrows shown in the illustration and open the glove compartment door assembly until the stoppers are released.

    3. B004IJHC01
      *a 60°
      B006ZFL Remove in this Direction

      Open the glove compartment door assembly to approximately 60° from its closed position. Pull it horizontally in the direction indicated by the arrow shown in the illustration to disengage the 2 hinges and remove the glove compartment door assembly.

      Note

      Pulling the glove compartment door assembly upward when removing it will cause the hinges to deform. Be sure to pull out the glove compartment door assembly horizontally.

  2. REMOVE LOWER INSTRUMENT COVER LH (for Type B)


    1. Open the lower instrument panel door.

    2. B004N4RC01
      B006ZFL Remove in this Direction

      Disengage the claw and 2 guides to remove the lower instrument cover LH as shown in the illustration.

  3. REMOVE AIR FILTER COVER PLATE


    1. B004J89C01
      B006ZFL Remove in this Direction (1)
      B006WSJ Remove in this Direction (2)

      Disengage the claw and 2 guides as indicated by the arrows, in the order shown in the illustration to remove the air filter cover plate.

  4. REMOVE CLEAN AIR FILTER


    1. B004HV0C01
      B006ZFL Remove in this Direction

      Remove the air filter sub-assembly as shown in the illustration.

    2. B0070LE

      Disengage the 4 guides to remove the clean air filter from the air filter case.