Click here

2GR-FKS SPARK PLUG REMOVAL

Click here
Click here

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during spark plug removal/installation are shown below.

Table 1. Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link

  • Replacement of ignition coil assembly

  • Replacement of spark plug

 Inspection after repair

  • Poor idle, etc.

  • Engine start function, etc.

Click here
Click here

PROCEDURE


  1. Click here

    REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. Click here

    REMOVE IGNITION COIL ASSEMBLY

    Click here

  3. Click here

    REMOVE SPARK PLUG


    1. B006Y5S

      Remove the 6 spark plugs from the cylinder head sub-assembly and cylinder head LH.

      Note:

      If a spark plug has been struck or dropped, replace it.

      Tip:

      Arrange the removed parts in the correct order.