2GR-FKS ENGINE CONTROL SERVICE DATA

IGNITION SYSTEM
Standard Insulation Resistance Spark plug (terminal part) - Body ground 10 MΩ or higher
Spark Plug Type DENSO made FK20HBR8
Maximum Electrode Gap for Used Spark Plug 1.1 mm (0.0433 in.)
Standard Electrode Gap for New Spark Plug 0.7 to 0.8 mm (0.0276 to 0.0315 in.)
CAMSHAFT OIL CONTROL VALVE
Standard Stroke for Intake Side 4.5 mm (0.177 in.) or more
for Exhaust Side 2.2 mm (0.0866 in.) or more
CAMSHAFT OIL CONTROL SOLENOID
Plunger Extends Outwards 5.9 mm (0.232 in.) or more
THROTTLE BODY
Standard Resistance 1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω
VACUUM SWITCHING VALVE (for Engine Mounting)
Standard Resistance 1 - 2 20°C (68°F) 37 to 44 Ω
1 - Body ground 10 kΩ or higher
2 - Body ground 10 kΩ or higher
MASS AIR FLOW METER
Standard Resistance 4 (THA) - 2 (E2G) -20°C (-4°F) 13.6 to 18.4 kΩ
20°C (68°F) 2.21 to 2.69 kΩ
60°C (140°F) 0.49 to 0.67 kΩ
ENGINE COOLANT TEMPERATURE SENSOR
Standard Resistance 20°C (68°F) 2.32 to 2.59 kΩ
80°C (176°F) 0.310 to 0.326 kΩ
KNOCK SENSOR
Standard Resistance 25°C (77°F) 120 to 280 kΩ
AIR FUEL RATIO SENSOR

Standard Resistance

Air Fuel Ratio Sensor (for Bank 1)

 1 (HA1A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
1 (HA1A) - 4 (A1A-) Always 10 kΩ or higher

Standard Resistance

Air Fuel Ratio Sensor (for Bank 2)

 1 (HA2A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
1 (HA2A) - 4 (A2A-) Always 10 kΩ or higher
HEATED OXYGEN SENSOR

Standard Resistance

Heated Oxygen Sensor (for Bank 1)

 1 (HT1B) - 2 (+B) 20°C (68°F) 5 to 10 Ω
1 (HT1B) - 4 (E2) Always 10 kΩ or higher

Standard Resistance

Heated Oxygen Sensor (for Bank 2)

 1 (HT2B) - 2 (+B) 20°C (68°F) 5 to 10 Ω
1 (HT2B) - 4 (E2) Always 10 kΩ or higher
RELAY

Standard Resistance

(No. 1 Electronic Fuel Injection Main Relay (EFI-MAIN NO. 1))

 3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
Battery voltage applied between terminals 1 and 2 Below 1 Ω

Standard Resistance

(No. 2 Electronic Fuel Injection Main Relay (EFI-MAIN NO. 2))

 3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
Battery voltage applied between terminals 1 and 2 Below 1 Ω

Standard Resistance

(Air Fuel Ratio Sensor Heater Relay (EFI-MAIN NO. 3))

 3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
Battery voltage applied between terminals 1 and 2 Below 1 Ω

Standard Resistance

(EFI Injection Relay (D INJ))

 3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
Battery voltage applied between terminals 1 and 2 Below 1 Ω

Standard Resistance

(No. 2 ignition relay (IG2 NO. 1))

 3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
Battery voltage applied between terminals 1 and 2 Below 1 Ω