TRANSMISSION CONTROL CABLE INSTALLATION

PROCEDURE

1. Click here

   INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY

   
   

   1. Pass the transmission control cable assembly into the vehicle and install the transmission control cable assembly to the vehicle body with the 2 nuts.

      6.0 N*m

      61 kgf*cm

      53 in.*lbf

   2. Connect the transmission control cable assembly to the vehicle body with the 2 nuts.

      6.0 N*m

      61 kgf*cm

      53 in.*lbf

   3. Connect the transmission control cable assembly to the No. 1 transmission control cable bracket with a new clip.

   4. 

      *a	Correct
      *b	Incorrect

      Connect the transmission control cable assembly to the transmission control shaft lever as shown in the illustration.

      Note:

      Before installing the transmission control cable assembly, check that the park/neutral position switch assembly and shift lever are in N.

2. Click here

   INSTALL NO. 1 CONSOLE BOX DUCT

   
   

   1. Install the No. 1 console box duct.

3. Click here

   INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY

   Click here

4. Click here

   INSTALL FRONT LOWER NO. 1 FLOOR HEAT INSULATOR

   
   

   1. Install the front lower No. 1 floor heat insulator to the vehicle body with the 2 nuts.

      4.9 N*m

      50 kgf*cm

      43 in.*lbf

5. Click here

   INSTALL FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst)

   Click here

6. Click here

   INSTALL BATTERY CLAMP SUB-ASSEMBLY

   Click here

7. Click here

   INSTALL ECM

   Click here

8. Click here

   INSTALL BATTERY

   Click here

9. Click here

   INSPECT SHIFT LEVER POSITION

   Click here

10. Click here

    ADJUST SHIFT LEVER POSITION

    Click here