SHIFT PADDLE SWITCH INSPECTION

PROCEDURE


  1. INSPECT SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)


    1. Shift Paddle Switch LH (Transmission Shift Switch Assembly):


      1. B0071L0C03
        *a

        Component without harness connected

        (Shift Paddle Switch LH (Transmission Shift Switch Assembly))

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (SDN) - 2 (ECC) "-" (Down shift) shift paddle switch operated and held Below 13 Ω
        "-" (Down shift) shift paddle switch not operated 10 kΩ or higher
        1 (SDN) - 3 (ECC1) "-" (Down shift) shift paddle switch operated and held Below 13 Ω
        "-" (Down shift) shift paddle switch not operated 10 kΩ or higher

        If the result is not as specified, replace the shift paddle switch LH (transmission shift switch assembly).

    2. Shift Paddle Switch RH (Transmission Shift Switch Assembly):


      1. B0071L0C04
        *a

        Component without harness connected

        (Shift Paddle Switch RH (Transmission Shift Switch Assembly))

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (SUP) - 2 (ECC) "+" (Up shift) shift paddle switch operated and held Below 13 Ω
        "+" (Up shift) shift paddle switch not operated 10 kΩ or higher

        If the result is not as specified, replace the shift paddle switch RH (transmission shift switch assembly).