AUTOMATIC TRANSAXLE SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tech Tips


  • The ECM is connected to the CAN communication system. Therefore, before starting troubleshooting, make sure to check that there are no malfunctions in the CAN communication system.

  • *: Use the GTS.

PROCEDURE


  1. VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT

    NEXT
  2. CUSTOMER PROBLEM ANALYSIS

    Result
    Proceed to
    NEXT

    NEXT
  3. INSPECT BATTERY VOLTAGE

    Standard Voltage
    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery before proceeding.

    Result
    Proceed to
    NEXT

    NEXT
  4. CONNECT GTS TO DLC3*

    Result
    Proceed to
    NEXT

    NEXT
  5. CHECK AND CLEAR DTCS AND FREEZE FRAME DATA*


    1. Refer to DTC Check / Clear.

      Click here

      Result
      Proceed to
      NEXT

    NEXT
  6. VISUAL INSPECTION

    Result
    Proceed to
    NEXT

    NEXT
  7. SELECT CHECK MODE DIAGNOSIS*


    1. Refer to Check Mode Procedure.

      Click here

      Result
      Proceed to
      NEXT

    NEXT
  8. PROBLEM SYMPTOM CONFIRMATION


    1. Refer to Road Test.

      Click here

      Result
      Result Proceed to
      Symptom does not occur A
      Symptom occurs B

    B
    A
  9. SYMPTOM SIMULATION


    1. Refer to Symptom Simulation.

      Click here

      Result
      Proceed to
      NEXT

    NEXT
  10. DTC CHECK*


    1. Refer to DTC Check / Clear.

      Click here

      Result
      Result Proceed to
      DTCs are not output A
      DTCs are output B

    B
    A
  11. BASIC INSPECTION


    1. Refer to Park/Neutral Position Switch.

      Click here

    2. Refer to Transmission Control Cable.

      Click here

      Result
      Proceed to
      OK
      NG

    NG
    OK
  12. MECHANICAL SYSTEM TESTS


    1. Refer to Mechanical System Tests.

      Click here

      Result
      Proceed to
      OK
      NG

    NG
    OK
  13. HYDRAULIC TEST


    1. Refer to Hydraulic Test.

      Click here

      Result
      Proceed to
      OK
      NG

    NG
    OK
  14. MANUAL SHIFTING TEST


    1. Refer to Manual Shifting Test.

      Click here

      Result
      Proceed to
      OK
      NG

    NG
    OK
  15. PROBLEM SYMPTOMS TABLE CHAPTER 1


    1. Refer to Problem Symptoms Table.

      Click here

      Result
      Proceed to
      OK
      NG

    NG
    OK
  16. PROBLEM SYMPTOMS TABLE CHAPTER 2


    1. Refer to Problem Symptoms Table.

      Click here

      Result
      Proceed to
      NEXT

    NEXT
  17. COMPONENT INSPECTION

    Result
    Proceed to
    NEXT

    NEXT
  18. REPAIR OR REPLACE

    Result
    Proceed to
    NEXT

    NEXT
  19. CONFIRMATION TEST

    Result
    Proceed to
    NEXT

    NEXT
  20. DTC CHART


    1. Refer to Diagnostic Trouble Code Chart.

      Click here

      Result
      Proceed to
      NEXT

    NEXT
  21. CIRCUIT INSPECTION

    Result
    Proceed to
    NEXT

    NEXT
  22. IDENTIFICATION INFORMATION

    Result
    Proceed to
    NEXT

    NEXT