DYNAMIC RADAR CRUISE CONTROL SYSTEM(except 2AR-FE) OPERATION CHECK


  1. INPUT SIGNAL CHECK


    1. Connect the GTS to the DLC3.

    2. B006ZTIC01
      *1 Steering Pad Switch Assembly
      *a Cruise Control Main Switch
      *b -SET Switch
      *c +RES Switch
      *d CANCEL Switch

      Check the steering pad switch assembly using the Data List function of the GTS (cruise control main switch, -SET switch, +RES switch and CANCEL switch).

      Click here

  2. INSPECT CRUISE CONTROL MAIN SWITCH


    1. Turn the engine switch on (IG).

    2. B00707D

      Turn the dynamic radar cruise control system on using the cruise control main switch.

    3. B006XMEC20
      *a

      Cruise Control Indicator

      (Vehicle-to-vehicle Distance Control Mode)
      *b Multi-information Display

      Check that the cruise control indicator (vehicle-to-vehicle distance control mode) in the combination meter assembly illuminates and "RADAR READY" is displayed on the multi-information display.

    4. Turn the cruise control system off using the cruise control main switch. Check that the cruise control indicator (vehicle-to-vehicle distance control mode) in the combination meter assembly and "RADAR READY" on the multi-information display turn off.

    5. Turn the engine switch off with the cruise control indicator (vehicle-to-vehicle distance control mode) in the combination meter assembly illuminated and "RADAR READY" on the multi-information display displayed. Turn the engine switch back to on (IG) and check the cruise control indicator (vehicle-to-vehicle distance control mode) in the combination meter assembly and "RADAR READY" on the multi-information display are turned off.

  3. INSPECT MODE SELECT


    1. Turn the engine switch on (IG).

    2. B00707D

      Push and hold the cruise control main switch for 1.5 seconds or more with the dynamic radar cruise control system off to change to constant speed control mode.

      Note

      Do not push any other switches before pushing the cruise control main switch. If any other switches are pushed, turn the dynamic radar cruise control system off and repeat the above procedure.

    3. B006ZYLC04
      *a

      Cruise Control Indicator

      (Vehicle-to-vehicle Distance Control Mode)
      *b Multi-information Display
      *c

      Cruise Control Indicator

      (Constant Speed Control Mode)

      Check that the cruise control indicator (vehicle-to-vehicle distance control mode) in the combination meter assembly and "RADAR READY" on the multi-information display turn off and the cruise control indicator (constant speed control mode) illuminates.

      Tech Tips

      If a malfunction is detected, turn the engine switch off and repeat the procedure above.

  4. INSPECT VEHICLE-TO-VEHICLE DISTANCE CONTROL SWITCH


    1. Turn the engine switch on (IG).

    2. B00707D

      Turn the dynamic radar cruise control system on using the cruise control main switch.

    3. B006ZRVC01
      *a Vehicle-to-vehicle Distance Control Switch

      Press the vehicle-to-vehicle distance control switch.

    4. Check that the indicator of the vehicle-to-vehicle distance, which is shown on the multi-information display in the combination meter assembly changes from long to middle to short in that order.

      Tech Tips

      Long is automatically selected each time the engine switch is turned on (IG).