HIGH MOUNTED STOP LIGHT ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE CENTER STOP LIGHT COVER


    1. A01OCA9C01
      B004FO9 Protective Tape

      Apply protective tape around the center stop light assembly as shown in the illustration.

    2. A01O99YC01
      B004FO9 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and guide to remove the center stop light cover.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. REMOVE NO. 2 CENTER STOP LIGHT COVER LH


    1. A01OD13

      Remove the screw.

    2. A01OD6M

      Using a moulding remover, disengage the guide and 5 claws to remove the No. 2 center stop light cover LH.

      Note

      When removing the No. 2 center stop light cover LH, take care not to damage the back window glass sub-assembly and vehicle body.

      Tech Tips

      When removing the No. 2 center stop light cover LH, disengage the guide and 5 claws from the inside of the No. 2 center stop light cover LH.

  3. REMOVE NO. 2 CENTER STOP LIGHT COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. REMOVE CENTER STOP LIGHT CLIP


    1. A01OAQMC01
      *a 90°

      Using a screwdriver, turn the center stop light clip 90 degrees and remove the 2 center stop light clips.

  5. REMOVE CENTER STOP LIGHT ASSEMBLY


    1. A01OBB8

      Disengage the 4 clamps.

    2. A01OBY4

      Disconnect the connector.

    3. A01O9NN

      Remove the 2 screws.

    4. A01OBKP

      Disengage the 2 guides.

    5. A01OD24C01
      B004FO9 Double-sided Tape

      Separate the double-sided tape.

    6. A01ODQW

      Push the center stop light assembly toward the front of the vehicle to disengage the guide and remove the center stop light assembly.

      Note

      When removing the center stop light assembly, take care not to damage the back window glass sub-assembly and vehicle body.