REAR COMBINATION LIGHT ASSEMBLY DISASSEMBLY

PROCEDURE


  1. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A01OBU3

      Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb as shown in the illustration to disconnect them as a unit.

    2. A01O98V

      Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.

  2. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A01OAY1

      Disengage the 2 clamps.

    2. Disconnect the connector to remove the rear combination light socket and wire sub-assembly.

  3. REMOVE REAR BUMPER UPPER RETAINER


    1. A01OCJO

      Disengage the 2 guides to remove the rear bumper upper retainer.