REAR COMBINATION LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE REAR LIGHT COVER

    Click here

  3. SEPARATE LUGGAGE COMPARTMENT TRIM COVER


    1. A01OA2G

      Using a clip remover, remove the clip.

    2. A01ODOR

      Turn back the luggage compartment trim cover as shown in the illustration.

  4. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    1. A01OAUJ

      Disconnect the connector.

    2. A01OAEXC01
      B004FO9 Protective Tape

      Apply protective tape around the rear combination light assembly as shown in the illustration.

    3. for LH Side:


      1. Disengage the clamp.

    4. Remove the 3 screws.

    5. A01OAZHC01
      *a Pin
      *b Guide

      Pull the rear combination light assembly toward the rear of the vehicle to disengage the pin and guide and separate the rear combination light assembly as shown in the illustration.

      Note

      To prevent the rear combination light assembly from falling when disengaging the pin, lightly hold the rear combination light assembly.

    6. A01O9FJ

      Disengage the grommet to remove the rear combination light assembly.