RAIN SENSOR REMOVAL

PROCEDURE


  1. REMOVE NO. 1 LANE RECOGNITION COVER

    Click here

  2. REMOVE RAIN SENSOR


    1. A01OA03

      Disconnect the connector.

    2. A01OA3MC02
      *a Stopper

      Release the stopper by pulling it out and remove the rain sensor as indicated by the arrows, in the order shown in the illustration.

  3. CLEAN WINDSHIELD GLASS

    Tech Tips


    • The rain sensor tape is reusable. Only replace the tape if it is damaged or contaminated with foreign matter.

    • Check that there is no rain sensor tape residue remaining on the windshield glass. If there is, remove the residue before installing the rain sensor.

    • If there is any rain sensor tape residue remaining on the windshield glass, replace the tape.