WASHER MOTOR REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL LH

    Click here

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH


    1. A01OCSH

      Remove the 3 screws and front wheel opening extension pad LH.

  3. REMOVE FRONT FENDER LINER LH


    1. A01OBURC02
      *a 90°

      Using a screwdriver, turn the pin 90 degrees clockwise to remove the pin hold clip.

    2. A01OCO6

      Remove the 3 screws.

    3. A01OBCF

      Remove the 9 screws.

    4. A01OB4M

      Remove the clip.

    5. A01OABS

      Remove the 7 clips and front fender liner LH.

  4. DRAIN WINDSHIELD WASHER FLUID


    1. A01OCN5

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the windshield washer fluid.

      Tech Tips

      Use a container to collect the windshield washer fluid.

  5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A01O9G8

      Disconnect the connector.

    2. Remove the windshield washer motor and pump assembly as shown in the illustration.