WIPER SWITCH INSTALLATION

PROCEDURE


  1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. B004ETB

      Engage the claw as shown in the illustration to install the windshield wiper switch assembly.

    2. Connect the 2 connectors.

  2. INSTALL TILT AND TELESCOPIC SWITCH (for RHD)

    for Power Tilt and Power Telescopic Steering Column:

    Click here

  3. INSTALL STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column)

    Note

    If the steering column cover (lower) is installed in the incorrect order, the parts may break.


    1. Engage the claw to install the steering column cover (upper).

    2. Engage the 4 clips and 2 claws to connect the steering column cover (upper) to the instrument cluster finish panel assembly.

    3. Engage the 3 claws.

    4. B004GAJ

      Engage the 2 claws.

    5. B004E53

      Engage the 2 claws.

    6. Turn the steering wheel assembly to the left and install the screw.

    7. Turn the steering wheel assembly to the right and install the steering column cover (lower) with the screw.

  4. INSTALL STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column)


    1. Engage the claw to install the steering column cover (upper).

    2. Engage the 4 clips and 2 claws to connect the steering column cover (upper) to the instrument cluster finish panel assembly.

    3. B004FWJ

      Temporarily install the steering column cover (lower) as shown in the illustration.

    4. B004EQJ

      Engage the 2 claws.

    5. B004EQT

      Engage the 2 claws.

    6. Install the screw.

    7. Turn the steering wheel assembly to the left and install the screw.

    8. Turn the steering wheel assembly to the right and install the steering column cover (lower) with the screw.

  5. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

    Click here