WIPER SWITCH REMOVAL

PROCEDURE


  1. CHANGE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM SETTINGS (for Power Tilt and Power Telescopic Steering Column)

    Click here

  2. REMOVE STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column)

    Note

    Removing the steering column cover (lower) in the incorrect order will cause the parts to break.


    1. Release the tilt and telescopic lever and fully extend and lower the steering column assembly.

    2. Lock the tilt and telescopic lever.

    3. B004GRS

      Turn the steering wheel assembly to the left and remove the screw.

    4. B004EBX

      Turn the steering wheel assembly to the right and remove the screw.

    5. B004F5DC01
      *a Push

      Push the left side of the steering column cover (lower) to disengage the 2 claws as shown in the illustration.

    6. B004FH5C01
      *a Push

      Push the right side of the steering column cover (lower) to disengage the 2 claws as shown in the illustration.

    7. B004GT6C01
      *a Claw (A)
      *b Claw (B)

      Insert your fingers into the opening for the tilt lever on the steering column cover (lower) and disengage the claw (A).

      Tech Tips

      Spread the claw to disengage it.

    8. Disengage the 2 claws (B) to remove the steering column cover (lower).

    9. B004GTR

      Disengage the 2 claws and 4 clips to separate the steering column cover (upper) from the instrument cluster finish panel assembly.

    10. B004GCJ

      Disengage the claw to remove the steering column cover (upper).

  3. REMOVE STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column)


    1. B004GRS

      Turn the steering wheel assembly to the left and remove the screw.

    2. B004EBX

      Turn the steering wheel assembly to the right and remove the screw.

    3. B004EDU

      Remove the screw.

    4. B004FYZC01
      *a Push

      Push the left side of the steering column cover (lower) to disengage the 2 claws as shown in the illustration.

    5. B004GCCC02
      *a Push

      Push the right side of the steering column cover (lower) to disengage the 2 claws as shown in the illustration.

    6. B004GB1

      Disengage the 2 claws.

    7. B004EL0

      Remove the steering column cover (lower) as shown in the illustration.

    8. B004GTR

      Disengage the 2 claws and 4 clips to separate the steering column cover (upper) from the instrument cluster finish panel assembly.

    9. B004GCJ

      Disengage the claw to remove the steering column cover (upper).

  4. REMOVE TILT AND TELESCOPIC SWITCH (for RHD)

    for Power Tilt and Power Telescopic Steering Column:

    Click here

  5. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. B004EB2

      Disconnect 2 connectors.

    2. B004EYM

      Using a screwdriver, disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

      Note

      If the claw is pulled with excessive force, it may break.