FRONT WIPER MOTOR REMOVAL

PROCEDURE


  1. REMOVE FRONT WIPER ARM HEAD CAP


    1. A01OCIAC01
      *a Protective Tape

      Using a screwdriver, disengage the 3 claws to remove the front wiper arm head cap.

      Tech Tips


      • Tape the screwdriver tip before use.


      • Use the same procedure for the RH side and LH side.

  2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH


    1. A01OARM

      Remove the nut and front wiper arm and blade assembly LH.

  3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH


    1. A01OC7K

      Remove the nut and front wiper arm and blade assembly RH.

  4. REMOVE COWL TOP SILENCER PAD LH


    1. A01OA20

      Remove the 2 clips and cowl top silencer pad LH.

  5. REMOVE COWL TOP SILENCER PAD RH


    1. A01OBHJ

      Remove the clip and cowl top silencer pad RH.

  6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY


    1. A01OC9R

      Disengage the 2 claws to separate the windshield outside moulding LH.

    2. A01OAHE

      Disengage the 2 claws to separate the windshield outside moulding RH.

    3. Remove the 2 clips.

      A01OAGD

    4. Disengage the 8 guides as shown in the illustration.

      A01OBWN

    5. Disengage the 9 guides and remove the cowl top ventilator louver sub-assembly as shown in the illustration.

      A01ODG8

  7. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    1. w/ Windshield Deicer System:


      1. A01OA6C

        Disconnect the connector.

    2. A01ODFI

      Disconnect the connector.

    3. A01O9DIC01
      *a Motor Grommet

      Remove the 3 bolts.

    4. Disengage the motor grommet as shown in the illustration and remove the windshield wiper motor and link assembly.

      Note

      Be careful not to damage the windshield when removing the windshield wiper motor and link assembly.

  8. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY


    1. A01OBLIC01
      *1 No. 1 Windshield Wiper Link Rod
      *a Protective Tape
      *b Pivot of the windshield wiper motor assembly

      Using a screwdriver, separate the No. 1 windshield wiper link rod from the pivot of the windshield wiper motor assembly as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01OAKS

      Using a T30 "TORX" socket wrench, remove the 2 bolts and windshield wiper motor assembly from the windshield wiper link assembly.