DOOR COURTESY LIGHT INSPECTION

PROCEDURE


  1. INSPECT COURTESY LIGHT ASSEMBLY LH


    1. A01OA91C01
      *a

      Component without harness connected

      (Courtesy Light Assembly LH)

      Apply auxiliary battery voltage to the connector and check that the courtesy light LH comes on.

      OK
      Measurement Condition Condition Specified Condition

      Auxiliary battery positive (+) → 1

      Auxiliary battery negative (-) → 2

      		 Always Courtesy light LH comes on

      If the result is not as specified, replace the courtesy light assembly LH.

  2. INSPECT COURTESY LIGHT ASSEMBLY RH


    1. A01OA91C01
      *a

      Component without harness connected

      (Courtesy Light Assembly RH)

      Apply auxiliary battery voltage to the connector and check that the courtesy light RH comes on.

      If the result is not as specified, replace the bulb or courtesy light assembly RH.

      OK
      Measurement Condition Condition Specified Condition

      Auxiliary battery positive (+) → 1

      Auxiliary battery negative (-) → 2

      		 Always Courtesy light RH comes on

      If the result is not as specified, replace the courtesy light assembly RH.