DATA LIST
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| ACC SW | Power switch | ON or OFF | ON: Power switch on (ACC) OFF: Power switch off |
- |
| IG SW | Power switch | ON or OFF | ON: Power switch on (IG) OFF: Power switch off or on (ACC) |
- |
| FR Door Lock Pos | Front door RH unlock detection switch | LOCK or UNLOCK | LOCK: Front door RH locked UNLOCK: Front door RH unlocked |
- |
| FR Door Courtesy SW | Front door courtesy light switch assembly (for RH) | ON or OFF | ON: Front door RH open OFF: Front door RH closed |
- |
| FL Door Lock Pos | Front door LH unlock detection switch | LOCK or UNLOCK | LOCK: Front door LH locked UNLOCK: Front door LH unlocked |
- |
| FL Door Courtesy SW | Front door courtesy light switch assembly (for LH) | ON or OFF | ON: Front door LH open OFF: Front door LH closed |
- |
| Hood Courtesy SW | Engine hood courtesy switch | ON or OFF | ON: Engine hood open OFF: Engine hood closed |
- |
| Luggage Courtesy SW | Luggage compartment door courtesy switch | ON or OFF | ON: Luggage compartment door open OFF: Luggage compartment door closed |
- |
| Intrusion Sens OFF SW | Intrusion sensor cancel switch*1 | ON or OFF | ON: Intrusion sensor cancel switch on OFF: Intrusion sensor cancel switch off |
- |
| Glass Break Sensor Detection | Glass breakage sensor breakage detection*1 | ON or OFF | ON: Glass breakage sensor breakage detected OFF: Glass breakage sensor breakage not detected |
- |
| Intrusion Sensor | Detection status of the intrusion sensor (theft warning ultrasonic sensor)*1 | ON or OFF | ON: Intrusion detected OFF: Intrusion not detected |
- |
| Tilt Sensor | Detection status of the tilt sensor (yaw rate and acceleration sensor)*2 | ON or OFF | ON: Change in pitch angle detected OFF: Change in pitch angle not detected |
- |
| Intrusion Sen Conn | Intrusion sensor (theft warning ultrasonic sensor) connection*1 | ON or OFF | ON: Intrusion sensor connected OFF: Intrusion sensor not connected |
- |
| Tilt Sensor Connect | Tilt sensor (yaw rate and acceleration sensor) connection*2 | ON or OFF | ON: Tilt sensor (yaw rate and acceleration sensor) connected OFF: Tilt sensor (yaw rate and acceleration sensor) not connected |
- |
| Sealed Glas Brak Sen | Glass breakage sensor connection*1 | With or Without | With: Glass breakage sensor connected Without: Glass breakage sensor not connected |
- |
| Intrusion Sensor Sound Detect | Sound detection status of the intrusion sensor (theft warning ultrasonic sensor)*3 | ON or OFF | ON: Sound detected OFF: Sound not detected |
Not applicable |
| Panic Function | Setting of the customized item "Panic Function"*4 | ON or OFF | Customized value displayed | - |
| Intrusion Win Opened | Setting of the customized item "Intrusion Win Opened"*1 | ON or OFF | Customized value displayed | - |
| Security control with mechanism key | Setting of the customized item "Security control with mechanism key"*5 | ON or OFF | Customized value displayed | - |
| Communication Theft Deterrent | Connection status between theft deterrent ECU and main body ECU (multiplex network body ECU)*3 | STOP or OK | STOP: Communication stopped OK: Normal communication |
Not applicable |
| The Number of DTC | Number of DTCs | 0 to 255 | Number of DTCs will be displayed | - |
*1: w/ Intrusion Sensor Cancel Switch
*2: w/ Tilt Sensor
*3: Although the item is displayed on the GTS, it is not applicable to this vehicle.
*4: w/ Panic Switch
*5: Vehicles displaying the item "Security control with mechanism key" on the GTS
ACTIVE TEST
Tech Tips
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body or Entry&Start / Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Security Horn2 | Theft warning siren assembly*2 | OFF/ON | - |
| Vehicle Horn | Vehicle horns | OFF/ON | - |
| Security Horn | Security horn assembly*1 | OFF/ON | - |
| Power For Intrusion Sensor | Intrusion sensor (theft warning ultrasonic sensor) power supply*3 | OFF/ON | - |
| Power For Tilt Sensor | Tilt sensor (yaw rate and acceleration sensor) power supply*4 | OFF/ON | - |
*1: w/ Security Horn Assembly
*2: w/o Security Horn Assembly
*3: w/ Intrusion Sensor Cancel Switch
*4: w/ Tilt Sensor
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Immobiliser Indicator | Security indicator | OFF/ON | - |