DOOR CONTROL RECEIVER(for Package Tray) REMOVAL

PROCEDURE

1. REMOVE REAR SEAT ASSEMBLY

   Click here

2. REMOVE FRONT DOOR SCUFF PLATE LH

   Click here

3. REMOVE FRONT DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side.

4. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

   Click here

5. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH

   Click here

6. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

   Tech Tips

   Use the same procedure as for the LH side.

7. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH

   Tech Tips

   Use the same procedure as for the LH side.

8. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM COVER

   Click here

9. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER

   Click here

10. REMOVE REAR SEAT SUB FLOOR PANEL

    Click here

11. REMOVE NO. 2 ROOM PARTITION COVER

    Click here

12. REMOVE NO. 1 ROOM PARTITION COVER

    Tech Tips

    Use the same procedure as for the No. 2 room partition cover.

13. REMOVE NO. 3 ROOM PARTITION COVER

    Click here

14. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

    Click here

15. REMOVE SMART DOOR CONTROL RECEIVER ASSEMBLY

    
    

    1. 

       Disconnect the connector.

    2. Remove the bolt.

    3. Disengage the guide to remove the smart door control receiver assembly.