TRANSMITTER BATTERY REPLACEMENT

PROCEDURE


  1. REPLACE TRANSMITTER BATTERY (for Standard, Type A)

    Note

    Take extra care when handling these precision electronic components.


    1. A01ODJ3C01

      Push the release hook knob and remove the mechanical key as indicated by the arrows, in the order shown in the illustration.

    2. A01OBOAC01
      *a Protective Tape

      Insert a precision screwdriver into the gap, and turn the screwdriver to remove the transmitter housing cover.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01ODJGC01
      *a Protective Tape

      Insert a precision screwdriver into the gap and gently remove the transmitter battery (lithium battery: CR2032).

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the transmitter battery as the terminals may be damaged.

      • Do not touch the transmitter battery with wet hands. Moisture may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      Tech Tips

      Tape the screwdriver tip before use.

    4. A01OACO

      Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.

      Note


      • Do not bend the transmitter battery electrode during installation.

      • Keep the inside of the transmitter housing cover interior free of dust and oil.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

    5. A01OATE

      Install the transmitter housing cover by pressing down on it as shown in the illustration.

    6. A01ODNS

      Insert the mechanical key into the transmitter.

    7. Press one of the transmitter switches and check that the LED illuminates.

      OK
      Transmitter LED illuminates when a switch is pressed.

  2. REPLACE TRANSMITTER BATTERY (for Standard, Type B)

    Note

    Take extra care when handling these precision electronic components.


    1. A01OCE6C01

      Push the release hook knob and remove the mechanical key as indicated by the arrows, in the order shown in the illustration.

    2. A01OBEKC01
      *a Protective Tape

      Insert a precision screwdriver into the gap, and turn the screwdriver to remove the transmitter housing cover.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01OBJ3

      Disengage the 2 claws and remove the transmitter battery housing cover.

    4. A01OC8YC01
      *a Protective Tape

      Insert a precision screwdriver into the gap and gently remove the transmitter battery (lithium battery: CR2032).

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the transmitter battery as the terminals may be damaged.

      • Do not touch the transmitter battery with wet hands. Moisture may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      Tech Tips

      Tape the screwdriver tip before use.

    5. A01OB4I

      Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.

      Note


      • Do not bend the transmitter battery electrode during installation.

      • Keep the inside of the transmitter housing cover interior free of dust and oil.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

    6. Engage the 2 claws to install the transmitter battery housing cover.

    7. A01ODJV

      Install the transmitter housing cover by pressing down on it as shown in the illustration.

    8. A01ODNS

      Insert the mechanical key into the transmitter.

    9. Press one of the transmitter switches and check that the LED illuminates.

      OK
      Transmitter LED illuminates when a switch is pressed.

  3. REPLACE TRANSMITTER (CARD KEY) BATTERY (for Card Type)


    1. A01ODTV

      Lightly hold and remove the battery cover as shown in the illustration.

      Note

      Do not insert a screwdriver, etc. between the case and battery cover or forcibly bend the battery cover as this may deform the battery cover.

      Tech Tips


      • If the battery cover is held too firmly, it will become harder to pull out.

      • If the cover is slippery and it is difficult to pull it out, use non-slip gloves to pull the cover out.

    2. A01OCVJ

      Remove the transmitter (card key) battery (lithium battery: CR2412).

    3. A01OA31

      Insert the transmitter (card key) battery (lithium battery: CR2412) between the 2 terminals deep in the card as shown in the illustration.

      Note


      • Insert the transmitter (card key) battery so that its positive (+) side is facing the LEXUS mark.

      • Do not deform the terminals.

      • If the terminals are dirty, wipe the terminals with a soft cloth before installing the transmitter (card key) battery.

      Tech Tips

      Check if the card terminals are damaged or if foreign matter has entered the card.

    4. A01OBN5

      Install the battery cover as shown in the illustration.

      Note


      • Push the battery cover until its hooks are engaged securely.

      • If the battery cover has been removed and installed many times, be careful as the cover may become loose.