INTEGRATION RELAY INSTALLATION

PROCEDURE

1. INSTALL SEMICONDUCTOR PWR INTEGRATION ECU

   
   

   1. Connect the 5 connectors.

   2. 

      Engage the 2 claws to install the semiconductor pwr integration ECU as shown in the illustration.

2. INSTALL NO. 1 RELAY BLOCK COVER

   
   

   1. Engage the 3 claws to install the No. 1 relay block cover.

   2. Engage the 2 clamps.

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Click here

4. INSTALL BATTERY SERVICE HOLE COVER LH

   Click here