PROCEDURE
PRECAUTION
w/o Navigation System:
Note
When replacing the radio receiver assembly, always replace it with a new one. If a radio receiver assembly which was installed to another vehicle is used, the following may occur:
A communication malfunction DTC may be stored.
The radio receiver assembly may not operate normally.
w/ Navigation System:
Note
When replacing the radio receiver assembly or navigation ECU, always replace it with a new one. If a radio receiver assembly or navigation ECU which was installed to another vehicle is used, the following may occur:
A communication malfunction DTC may be stored.
The radio receiver assembly or navigation ECU may not operate normally.
After replacing the radio receiver assembly, if "New software is not compatible with the system. Contact your dealer." is displayed on the multi-display, update the software of the navigation ECU.
INSTALL RADIO RECEIVER ASSEMBLY
INSTALL NAVIGATION ECU (w/ Navigation System)
INSTALL NO. 2 RADIO BRACKET
w/o Navigation System:
Install the No. 2 radio bracket with the 3 screws.
w/ Navigation System:
Install the No. 2 radio bracket with the 5 screws.
INSTALL NO. 1 RADIO BRACKET
w/o Navigation System:
Install the No. 1 radio bracket with the 3 screws.
w/ Navigation System:
Install the No. 1 radio bracket with the 5 screws.
INSTALL NO. 1 NAVIGATION WIRE (w/ Navigation System)
INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
Connect each connector.
Engage the 4 clips to temporarily install the radio receiver assembly with bracket.
Install the radio receiver assembly with bracket with the 4 bolts.
INSTALL CONSOLE PANEL SUB-ASSEMBLY
INSTALL FRONT PANEL GARNISH RH
INSTALL FRONT PANEL GARNISH LH
INSTALL INSTRUMENT PANEL FINISH PANEL END RH
INSTALL INSTRUMENT PANEL FINISH PANEL END LH
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY