TIRE PRESSURE WARNING INITIATOR DRIVER(for RHD) INSTALLATION

PROCEDURE

1. INSTALL TIRE PRESSURE MONITOR INITIATOR DRIVER

   
   

   1. 

      Connect the connector to the tire pressure monitor initiator driver.

   2. Engage the hook to temporarily install the tire pressure monitor initiator driver.

   3. Install the nut.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

2. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Tech Tips

   Use the same procedure as for LHD.

   Click here

3. INSPECT TIRE PRESSURE WARNING SYSTEM

   Click here