TIRE PRESSURE WARNING RECEIVER INSTALLATION

PROCEDURE

1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

   
   

   1. Connect the connector to the tire pressure warning ECU and receiver.

   2. Engage the 2 hooks to temporarily install the tire pressure warning ECU and receiver.

   3. 

      Install the bolt.

      Torque:

      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH

   Click here

3. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

   Click here

4. INSTALL REAR SIDE SEATBACK ASSEMBLY LH

   Click here

5. CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

   Click here

6. INSTALL REAR SEAT CUSHION LOCK HOOK

   Click here

7. INSTALL REAR SEAT CUSHION ASSEMBLY

   Click here

8. INSTALL FRONT DOOR SCUFF PLATE LH

   Click here

9. REGISTER TRANSMITTER ID

   Click here

10. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here

11. PERFORM INITIALIZATION

    Click here