KICK-DOWN SWITCH(for RHD) INSPECTION

PROCEDURE


  1. INSPECT KICK DOWN SWITCH ASSEMBLY


    1. B004EBKC04
      *a

      Component without harness connected

      (Kick Down Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (E) - 2 (KD) Kick down switch assembly pushed Below 1 Ω
      1 (E) - 2 (KD) Kick down switch assembly not pushed 10 kΩ or higher

      If the result is not as specified, replace the kick down switch assembly.