KICK-DOWN SWITCH(for LHD) INSTALLATION

PROCEDURE


  1. INSTALL KICK DOWN SWITCH ASSEMBLY


    1. Install the kick down switch assembly to the vehicle body with the nut and 2 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Engage the clamp.

    3. Connect the kick down switch assembly connector.

  2. INSTALL NO. 3 DASH PANEL INSULATOR PAD


    1. Install the No. 3 dash panel insulator pad with the 2 clips.

    2. Return the front floor carpet assembly to its original position as shown in the illustration and engage each fastener.

      B004FGOC02
      *a Clamp *b Guide
      B004FO9 Fastener - -

    3. Connect the guide.

    4. Engage the clamp.

    5. Install the clip.

  3. INSTALL ACCELERATOR PEDAL ASSEMBLY

    Click here

  4. INSTALL FRONT DOOR OPENING TRIM COVER LH

    Click here

  5. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

  6. INSTALL FRONT NO. 1 CONSOLE BOX INSERT

    Click here

  7. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here