OIL PRESSURE SWITCH INSTALLATION

PROCEDURE


  1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. A01OALFC10
      *a Adhesive 1344
      *b Oil Inlet Port

      Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.

      Adhesive
      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

      Note


      • Do not apply adhesive to the oil inlet port of the engine oil pressure switch assembly.

      • Install the engine oil pressure switch assembly within 3 minutes of applying adhesive.

    2. A01OA6HC08
      *A Type A
      *B Type B

      Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

      Torque:
      Type A
      14.7 N*m  { 150 kgf*cm, 11 ft.*lbf }
      Type B
      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

    3. Connect the engine oil pressure switch assembly connector.

  2. INSPECT FOR OIL LEAK

    Click here