COOLING FAN MOTOR INSTALLATION

PROCEDURE

1. INSTALL NO. 2 COOLING FAN MOTOR

   
   

   1. Install the No. 2 cooling fan motor with the 3 screws.

      Torque:

      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

2. INSTALL COOLING FAN MOTOR

   
   

   1. Install the cooling fan motor with the 3 screws.

      Torque:

      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

3. INSTALL NO. 2 FAN

   Note

   Do not reverse the position of the fan and No. 2 fan when installing them. Doing so may damage the parts.

   
   

   1. Install the No. 2 fan with the nut.

      Torque:

      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

4. INSTALL FAN

   Note

   Do not reverse the position of the fan and No. 2 fan when installing them. Doing so may damage the parts.

   
   

   1. Install the fan with the nut.

      Torque:

      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

5. INSTALL COOLING FAN ECU

   
   

   1. Install the cooling fan ECU with the 2 screws.

      Torque:

      2.6 N*m  { 27 kgf*cm, 23 in.*lbf }

   2. Connect the 4 clamps and wire harness.

   3. Connect the cooling fan motor connector and No. 2 cooling fan motor connector.

6. INSTALL FAN SHROUD ASSEMBLY

   Click here

7. CONNECT ENGINE ROOM MAIN WIRE

   Click here

8. CONNECT NO. 2 RADIATOR HOSE SUB-ASSEMBLY

   
   

   1. Connect the No. 2 radiator hose sub-assembly to the fan shroud assembly with the bolt.

      Torque:

      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

   2. Install a new radiator hose clamp to the fan shroud assembly.

   3. Connect the No. 2 radiator hose sub-assembly to the radiator hose clamp.

9. INSTALL RADIATOR HOSE SUB-ASSEMBLY

   Click here

10. INSTALL RADIATOR RESERVE TANK ASSEMBLY

    Click here

11. INSTALL INLET NO. 1 AIR CLEANER

    Click here

12. ADD ENGINE COOLANT (for Engine)

    Click here

13. INSPECT FOR COOLANT LEAK (for Engine)

    Click here

14. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

15. INSTALL COOL AIR INTAKE DUCT SEAL

    Click here

16. INSTALL ENGINE ROOM SIDE COVER

    Click here