EXHAUST PIPE REMOVAL

PROCEDURE


  1. REMOVE FRONT CENTER FLOOR COVER LH

    Click here

  2. REMOVE FRONT CENTER FLOOR COVER RH

    Click here

  3. REMOVE FRONT CENTER FLOOR BRACE

    Click here

  4. REMOVE HEATED OXYGEN SENSOR

    Click here

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst)


    1. B004EIR

      Remove the 2 bolts and 2 nuts to disconnect the front exhaust pipe assembly (TWC: Rear Catalyst) from the exhaust manifold converter sub-assembly (TWC: Front Catalyst).

    2. B004F48

      Remove the 4 bolts and 4 compression springs and front exhaust pipe assembly (TWC: Rear Catalyst) from the tail exhaust pipe assembly and tail exhaust pipe LH.

    3. Remove the 3 exhaust pipe gaskets from the front exhaust pipe assembly (TWC: Rear Catalyst).

  6. REMOVE TAIL EXHAUST PIPE ASSEMBLY


    1. B004F96

      Remove the tail exhaust pipe assembly from the 3 exhaust pipe supports.

      Note

      Protect the rear bumper assembly using protection material such as a piece of cloth to avoid damage by the tail exhaust pipe assembly.

  7. REMOVE TAIL EXHAUST PIPE LH


    1. B004FNJ

      Remove the tail exhaust pipe LH from the 3 exhaust pipe supports.

      Note

      Protect the rear bumper assembly using protection material such as a piece of cloth to avoid damage by the tail exhaust pipe LH.

  8. REMOVE TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY


    1. B004EIE

      Remove the 3 bolts and tail exhaust pipe baffle sub-assembly from the tail exhaust pipe assembly.

    2. B004E51

      Remove the 3 bolts and tail exhaust pipe baffle sub-assembly from the tail exhaust pipe LH.