EXHAUST PIPE ADJUSTMENT

PROCEDURE

1. REMOVE TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY

   Click here

2. ADJUST TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY

   Tech Tips

   Use the same procedure for the tail exhaust pipe assembly side.

   
   

   1. 

      Loosen the 3 nuts.

      Tech Tips

      Loosen the nuts so that the tail exhaust pipe baffle sub-assembly can be adjusted by hand.

   2. 

      Temporarily install the tail exhaust pipe baffle sub-assembly to the tail exhaust pipe LH with the 3 bolts.

   3. 

      *1	Rear Bumper Assembly
      *2	Tail Exhaust Pipe Baffle Sub-assembly
      	Clearance

      Adjust the angle of the tail exhaust pipe baffle sub-assembly as shown in the illustration.

      Tech Tips

      Make sure the clearance between the rear bumper assembly and tail exhaust pipe baffle sub-assembly is even.

   4. 

      *a	Paint Mark

      Place a paint mark across the contact surfaces of the tail exhaust pipe baffle sub-assembly as shown in the illustration.

   5. Remove the 3 bolts and tail exhaust pipe baffle sub-assembly from the tail exhaust pipe LH.

   6. Align the paint marks and tighten the 3 nuts.

      Torque:

      19 N・m  { 194 kgf・cm }

3. INSTALL TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY

   Click here