FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE FAN SHROUD

    Click here

  2. REMOVE V-RIBBED BELT

    Click here

  3. REMOVE CRANKSHAFT PULLEY ASSEMBLY


    1. B004FU1C02
      *a Hold
      *b Turn

      Using SST, hold the crankshaft pulley assembly and loosen the crankshaft pulley set bolt. Further loosen the crankshaft pulley set bolt until 2 or 3 threads remain screwed into the crankshaft.

      SST
      09213-54015

      Tech Tips

      Part number of the installation bolt for SST (crankshaft pulley holding tool): 91551-80650 (quantity: 2)

    2. B004GVWC02
      *1 Crankshaft Pulley Bolt
      *a Hold
      *b Turn

      Using SST, remove the crankshaft pulley and crankshaft pulley set bolt.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05011 )

      Tech Tips

      Apply lubricant to the threads and end of SST.

  4. REMOVE TIMING CHAIN COVER OIL SEAL


    1. B004EDRC05
      *a Protective Tape

      Using a screwdriver, pry out the timing chain cover oil seal.

      Note

      Do not damage the surface of the press fit hole or crankshaft.

      Tech Tips

      Tape the screwdriver tip before use.