FUEL INJECTOR(for Direct Injection) INSPECTION

PROCEDURE


  1. INSPECT FUEL INJECTOR SET

    Note

    This inspection aims at checking the fuel injector set for an open or short. Because the fuel injector set of this vehicle is a high-pressure type, fuel injection volume cannot be checked.


    1. A01O9UNC01
      *a

      Component without harness connected

      (Fuel Injector Set)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 1.74 to 2.04 Ω

      If the result is not as specified, replace the fuel injector set.