BATTERY BLOWER REMOVAL

PROCEDURE


  1. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM COVER

    Click here

  2. REMOVE LUGGAGE COMPARTMENT TRIM BOX

    Click here

  3. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER

    Click here

  4. REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER

    Click here

  5. REMOVE REAR SEAT ASSEMBLY RH

    Click here

  6. REMOVE REAR SEAT SUB FLOOR PANEL

    Click here

  7. REMOVE NO. 1 ROOM PARTITION COVER

    Tech Tips

    Use the same procedure as for the No. 2 room partition cover.

    Click here

  8. REMOVE NO. 1 LUGGAGE COMPARTMENT LAMP ASSEMBLY

    Click here

  9. REMOVE FRONT UPPER LUGGAGE COMPARTMENT TRIM COVER

    Click here

  10. REMOVE ROPE HOOK ASSEMBLY (for RH Side)

    Click here

  11. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH (for RH Side)

    Click here

  12. REMOVE FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  13. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  14. REMOVE NO. 1 HYBRID BATTERY INTAKE DUCT


    1. B004EPU

      Remove the clip and No. 1 hybrid battery intake duct.

  15. REMOVE NO. 2 HYBRID BATTERY INTAKE DUCT

    Click here

  16. SEPARATE NO. 3 HYBRID BATTERY INTAKE DUCT


    1. B004G13C02
      B004FMB Slide

      Disengage the 3 claws.

    2. Slide the No. 3 hybrid battery intake duct as shown in the illustration to separate the No. 3 hybrid battery intake duct from the battery cooling blower assembly.

  17. REMOVE BATTERY COOLING BLOWER ASSEMBLY


    1. B004EXA

      Disconnect the battery cooling blower assembly connector and disengage the clamp.

    2. B004G5C

      Remove the 2 bolts, nut and battery cooling blower assembly.

      Note


      • Be careful not to touch the fan part of the battery cooling blower assembly.

      • Do not lift the battery cooling blower assembly using the wire harness.