INVERTER WITH CONVERTER COMPONENTS
ILLUSTRATION
| *1 | NO. 5 HV BATTERY SHIELD PANEL | *2 | SERVICE PLUG GRIP |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | NO. 1 ENGINE UNDER COVER ASSEMBLY | - | - |
ILLUSTRATION
| *A | for LHD | - | - |
| *1 | CONNECTOR COVER ASSEMBLY | *2 | FRAME WIRE |
| *3 | GENERATOR CABLE | *4 | HIGH VOLTAGE FUSE |
| *5 | INLET NO. 1 INVERTER COOLING HOSE | *6 | INVERTER MOTOR CABLE BRACKET ASSEMBLY |
| *7 | INVERTER TERMINAL COVER | *8 | INVERTER WITH CONVERTER ASSEMBLY |
| *9 | MOTOR CABLE | *10 | NO. 6 INVERTER BRACKET |
| *11 | OUTLET NO. 1 INVERTER COOLING HOSE | *12 | ENGINE ROOM MAIN WIRE |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | for RHD | - | - |
| *1 | HIGH VOLTAGE FUSE | *2 | NO. 6 INVERTER BRACKET |
| *3 | INVERTER MOTOR CABLE BRACKET ASSEMBLY | *4 | INVERTER WITH CONVERTER ASSEMBLY |
| *5 | OUTLET NO. 2 INVERTER COOLING HOSE | *6 | INLET NO. 2 INVERTER COOLING HOSE |
| *7 | INLET INVERTER COOLING PIPE | *8 | INVERTER TERMINAL COVER |
| *9 | AIR CONDITIONING HARNESS | *10 | CONNECTOR COVER ASSEMBLY |
| *11 | GENERATOR CABLE | *12 |
FRAME WIRE |
| *13 | MOTOR CABLE | *14 | NO. 4 INVERTER COOLING HOSE |
| *15 | NO. 5 INVERTER COOLING HOSE | *16 | NO. 1 RELAY BLOCK COVER |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | for LHD | - | - |
| *1 | INVERTER BUS-BAR PLATE SUB-ASSEMBLY | *2 | NO. 1 INVERTER COOLING HOSE |
| *3 | NO. 4 INVERTER BRACKET | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | for RHD | - | - |
| *1 | NO. 4 INVERTER BRACKET | *2 | INVERTER BUS-BAR PLATE SUB-ASSEMBLY |
| *3 | NO. 1 INVERTER COOLING HOSE | *4 | WIRING HARNESS CLAMP BRACKET |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | for LHD | - | - |
| *1 | NO. 5 INVERTER BRACKET | *2 | POWER STEERING ECU ASSEMBLY |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | for RHD | - | - |
| *1 | NO. 5 INVERTER BRACKET | *2 | POWER STEERING ECU ASSEMBLY |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |