RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT NO. 2 EFI MAIN RELAY (EFI MAIN NO. 2)


    1. A01ODGLN05

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the No. 2 EFI MAIN relay.

  2. INSPECT INJ RELAY (INJ)


    1. A01ODGLN05

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the INJ relay.