KNOCK SENSOR INSTALLATION

PROCEDURE

1. INSTALL KNOCK CONTROL SENSOR

   Tech Tips

   Perform "Inspection After Repair" after replacing the knock control sensor.

   Click here

   
   
   1. 

      *a	Up
      *b	Front of Engine
      *c	7°
      *d	10°

      Install the knock control sensor to the cylinder block sub-assembly with the bolt as shown in the illustration.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      
      

      • If the knock control sensor has been struck or dropped, replace it.

      • Make sure that the knock control sensor is installed in the correct position.

   2. Connect the knock control sensor connector.

2. INSTALL INTAKE MANIFOLD

   Click here

3. PERFORM INITIALIZATION

   
   

   1. Perform "Inspection After Repair" after replacing the knock control sensor.

      Click here