CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE


  1. INSTALL VVT SENSOR


    1. for Intake Side:


      1. Apply a light coat of engine oil to the O-ring of the VVT sensor.

        Note

        If reusing the VVT sensor, be sure to inspect the O-ring.

      2. Install the VVT sensor to the cylinder head cover sub-assembly with the bolt.

        Torque:
        10 N*m  { 102 kgf*cm, 7 ft.*lbf }

        Note


        • If the VVT sensor has been struck or dropped, replace it.

        • Make sure that the O-ring is not cracked or moved out of place when installing the VVT sensor.

      3. Connect the VVT sensor connector.

    2. for Exhaust Side:


      1. Apply a light coat of engine oil to the O-ring of the VVT sensor.

        Note

        If reusing the VVT sensor, be sure to inspect the O-ring.

      2. Install the VVT sensor to the cylinder head cover sub-assembly with the bolt.

        Torque:
        10 N*m  { 102 kgf*cm, 7 ft.*lbf }

        Note


        • If the VVT sensor has been struck or dropped, replace it.

        • Make sure that the O-ring is not cracked or moved out of place when installing the VVT sensor.

      3. Connect the VVT sensor connector.

  2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here