CAMSHAFT OIL CONTROL VALVE REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    1. for Exhaust Side:


      1. A01O9PY

        Disconnect the camshaft timing oil control valve assembly connector.

      2. Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.

        Note


        • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

        • If the camshaft timing oil control valve assembly has been struck or dropped, replace it.

      3. A01O98IC18
        *1 O-ring

        Remove the O-ring from the camshaft timing oil control valve assembly.

    2. for Intake Side:


      1. A01OCAH

        Disconnect the camshaft timing oil control valve assembly connector.

      2. Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.

        Note


        • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

        • If the camshaft timing oil control valve assembly has been struck or dropped, replace it.

      3. A01O98IC18
        *1 O-ring

        Remove the O-ring from the camshaft timing oil control valve assembly.