POWER WINDOW CONTROL SYSTEM OPERATION CHECK

CHECK AUTO UP / DOWN FUNCTION

1. Check that the driver door power window operates as follows:

   OK

   Condition	Master Switch	Switch Operation	Power Window
   Power switch on (IG)	Driver door	Pulled up (One touch operation)	Auto Up (Closes)
   		Pushed down (One touch operation)	Auto Down (Opens)

2. Check that the front passenger door power window operates as follows:

   OK

   Condition	Regulator Switch	Switch Operation	Power Window
   Power switch on (IG) Window lock switch off	Front passenger door	Pulled up (One touch operation)	Auto Up (Closes)
   		Pushed down (One touch operation)	Auto Down (Opens)

CHECK REMOTE MANUAL UP / DOWN FUNCTION

1. Check that the front passenger door power window operates as follows:

   OK

   Condition	Master Switch	Switch Operation	Power Window
   Power switch on (IG) Window lock switch off	Front passenger door	Pulled halfway up	Up (Closes)
   		Pushed halfway down	Down (Opens)

CHECK REMOTE AUTO UP / DOWN FUNCTION

1. Check that the front passenger door power window operates as follows:

   OK

   Condition	Master Switch	Switch Operation	Power Window
   Power switch on (IG) Window lock switch off	Front passenger door	Pulled up (One touch operation)	Auto Up (Closes)
   		Pushed down (One touch operation)	Auto Down (Opens)

CHECK KEY-OFF OPERATION FUNCTION

1. Check that each power window can be operated with the multiplex network master switch assembly or power window regulator switch assembly after the power switch is turned off.

   Tech Tips

   If the window lock switch is on, the front passenger door power window cannot be operated by using the power window regulator switch assembly. Therefore, turn the window lock switch off before checking the window operation.

2. Check that the key-off operation function does not operate immediately after the driver door or front passenger door is opened.

   Tech Tips

   If a power window is being operated by auto operation while the key-off operation function is on, and the driver door or front passenger door is opened, the power window will continue operating.

3. Check that all of the power windows cannot be operated after more than approximately 43 seconds have elapsed since the power switch was turned off.

CHECK WIRELESS TRANSMITTER-LINKED FUNCTION*

• *: This function is set through the customize setting, as it is off by default.

1. Check that all power windows operate as follows when operating the electrical key transmitter:

   OK

   Condition	Transmitter Operation	Power Window
   No key is inside vehicle, and all doors are closed and locked	LOCK switch pressed for more than 2.4 seconds	Up (Closes)
   No key is inside vehicle, and all doors are closed and locked	LOCK switch released	Stop
   No key is inside vehicle, and all doors are closed and locked	UNLOCK switch pressed for more than 2.4 seconds	Down (Opens)
   No key is inside vehicle, and all doors are closed and locked	UNLOCK switch released	Stop

CHECK KEY-LINKED FUNCTION*

• *: This function is set through the customize setting, as it is off by default.

1. Check that all power windows operate as follows:

   OK

   Condition	Door Key Cylinder Operation	Power Window
   No key is inside vehicle, and all doors are closed	Key is turned to the lock position and held for more than 1.5 seconds	Up (Closes)
   No key is inside vehicle, and all doors are closed	Returned to neutral position	Stop
   No key is inside vehicle, and all doors are closed	Key is turned to the unlock position and held for more than 1.5 seconds	Down (Opens)
   No key is inside vehicle, and all doors are closed	Returned to neutral position	Stop

CHECK WINDOW OPEN WARNING FUNCTION

CHECK JAM PROTECTION FUNCTION

1. Check the basic function.

   CAUTION:

   Do not put your fingers between the vehicle body and door glass to check the jam protection function. Also, prevent any part of your body from being caught during inspection.

   Tech Tips

   The jam protection function is operative during both the auto up and manual up operations while the hybrid vehicle control system is started or the power switch is on (IG), and also for approximately 43 seconds after the power switch is turned off.

   
   

   1. Fully open the power window.

   2. 

      *a	Check Jig
      *b	Cloth

      Set a check jig wrapped with a piece of cloth near the power window fully closed position.

   3. Operate the auto up or manual up function and check that the power window stops and goes down after the check jig is caught between the door glass and roof side rail weatherstrip, and stops when the opening reaches approximately 135 mm (5.31 in.) (auto up function) or 35 mm (1.38 in.) (manual up function) or until approximately 5 seconds have elapsed.

      Tech Tips

      
      

      • After the jam protection function has operated when an auto up or manual up operation was performed, the jam protection function will not operate if the manual up operation is performed again within approximately 4 seconds.

      • After the catch protection function has operated when an auto down or manual down operation was performed, the jam protection function will not operate if the manual up operation is performed within approximately 4 seconds.

   4. While the power window is moving down, check that the door glass cannot be raised using the power window switch.

CHECK CATCH PROTECTION FUNCTION

DOOR-LINKED WINDOW CONTROL

1. Open the driver side door or front passenger side door, and then check that the window glass whose door has just been opened descends approximately 12 mm (0.472 in.) automatically from the fully closed position.

2. Close the driver side door or front passenger side door, and then check that the window glass whose door is just closed ascends automatically to the fully closed position.

   Tech Tips

   The index control is not performed if the window glass opened more than approximately 12 mm (0.472 in.) from the fully-closed position. However, considering the backlash on the regulator, if the window opened more than approximately 12 mm (0.472 in.) because of the index control that caused the window glass to descend and there is no interruption from any other operation, then the window ascends automatically.

CHECK POWER WINDOW SWITCH LED ILLUMINATION