ROOF HEADLINING INSTALLATION
PROCEDURE
-
INSTALL ROOF HEADLINING ASSEMBLY
-
Install a new grommet to the vehicle body.
Tech Tips
Use the same procedure for the RH side and LH side
-
*a Clip (Black) *b Clip (White) Install the 2 clips to the roof headlining assembly.
-
Put the roof headlining assembly into the vehicle through the front passenger door as shown in the illustration.
Note
Do not damage the roof headlining assembly or vehicle interior.
-
for Roof Side (w/o Sliding Roof):
-
Engage the 3 guides.
-
Engage the 6 claws and 2 clips to install the roof headlining assembly.
-
Install the 2 screws to the 2 coat hooks.
-
-
for Roof Side (w/ Sliding Roof):
*a Guide *b Fastener
-
Engage the 2 guides.
-
Engage the 6 claws, 2 clips and 8 fasteners to install the roof headlining assembly.
-
Install the 2 screws to the 2 coat hooks.
-
Connect the connector to the sliding roof drive gear sub-assembly.
-
-
for Front Pillar LH Side:
-
Connect the 2 connectors.
-
Engage the 3 clamps.
-
-
for Windshield Glass Side:
-
Connect each connector.
-
-
-
INSTALL VISOR HOLDER (for LH Side)
-
Engage the 2 claws.
-
Push in the visor holder as shown in the illustration.
-
-
INSTALL VISOR ASSEMBLY LH
-
Install the visor assembly LH with the 2 screws.
-
-
INSTALL VISOR BRACKET COVER (for LH Side)
-
Engage the 4 claws to install the visor bracket cover.
-
-
INSTALL ASSIST GRIP SUB-ASSEMBLY (for LH Side)
-
Install the clip to the assist grip.
Tech Tips
Use the same procedure for the RH side and LH side.
-
Temporarily install a new assist grip cover to the assist grip as shown in the illustration.
Tech Tips
Use the same procedure for the RH side and LH side.
-
Engage the 2 clips to install the assist grip sub-assembly.
-
Engage the 2 claws to install the assist grip cover.
Note
Make sure that 2 clips are engaged securely.
Tech Tips
Use the same procedure for the RH side and LH side.
-
-
INSTALL VISOR HOLDER (for RH Side)
Tech Tips
Use the same procedure as for the LH side.
-
INSTALL VISOR ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
-
INSTALL VISOR BRACKET COVER (for RH Side)
Tech Tips
Use the same procedure as for the LH side.
-
INSTALL ASSIST GRIP SUB-ASSEMBLY (for RH Side)
Tech Tips
Use the same procedure as for the LH side.
-
INSTALL NO. 1 ROOM LIGHT ASSEMBLY
-
INSTALL MAP LIGHT ASSEMBLY
-
INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Lane Departure Alert System)
-
INSTALL NO. 2 LANE RECOGNITION COVER (w/ Lane Departure Alert System)
-
INSTALL NO. 1 LANE RECOGNITION COVER (w/ Lane Departure Alert System)
-
INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
-
INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY LH
-
Engage the 3 claws and 2 clips to install the roof side rail garnish assembly LH.
-
-
INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH
-
Engage the guide.
-
Engage the claw and 4 clips to install the inner roof side garnish assembly LH.
-
-
INSTALL CENTER PILLAR GARNISH ASSEMBLY LH
-
Pass the floor anchor of the front seat outer belt assembly LH through the center pillar garnish assembly LH.
-
Engage the 2 guides and 4 claws to connect the belt guide of the front seat outer belt assembly LH.
-
Engage the 3 claws and clip.
-
Install the center pillar garnish assembly LH with the 2 screws.
-
-
INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH
-
Connect the connector.
-
Engage the clamp.
-
Engage the 7 claws, 7 clips and guide to install the front quarter trim panel assembly LH.
-
Install the 2 clips.
-
Connect the belt guide of the rear seat 3 point type outer belt assembly LH with the bolt.
- Torque:
- 21 N*m { 214 kgf*cm, 15 ft.*lbf }
-
-
INSTALL REAR SIDE SEATBACK ASSEMBLY LH
-
CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH
-
CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH
-
INSTALL LAP BELT OUTER ANCHOR COVER (for LH Side)
-
INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
-
INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
-
INSTALL CENTER PILLAR GARNISH ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
-
INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
-
INSTALL REAR SIDE SEATBACK ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
-
CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
-
CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
-
INSTALL LAP BELT OUTER ANCHOR COVER (for RH Side)
Tech Tips
Use the same procedure as for the LH side.
-
INSTALL REAR SEAT CUSHION LOCK HOOK
-
INSTALL REAR SEAT CUSHION ASSEMBLY
-
INSTALL FRONT PILLAR GARNISH LH
-
Remove the protective cover.
-
Make sure that the 2 front pillar garnish clips are not damaged.
Note
If a front pillar garnish clip is damaged, replace the front pillar garnish clip with a new one.
-
*a Front Pillar Garnish Clip (A) *b Front Pillar Garnish Clip (B) Engage the 2 front pillar garnish clips to the front pillar garnish LH.
Tech Tips
Engage the 2 front pillar garnish clips so that it is oriented as shown in the illustration.
-
Push the front pillar garnish LH as shown in the illustration to engage the 3 guides.
-
Engage the 2 front pillar garnish clips to install the front pillar garnish LH.
Tech Tips
Make sure that the curtain shield airbag assembly LH is not pinched.
-
-
INSTALL FRONT DOOR OPENING TRIM COVER LH
-
Engage the guide (B) and claw (B).
-
Engage the 3 claws (A) and guide (A) to install the front door opening trim cover LH.
-
-
INSTALL FRONT DOOR SCUFF PLATE LH
-
Engage the 5 guides and 12 claws to install the front door scuff plate LH.
-
-
INSTALL FRONT PILLAR GARNISH RH
Tech Tips
Use the same procedure as for the LH side.
-
INSTALL FRONT DOOR OPENING TRIM COVER RH
Tech Tips
Use the same procedure as for the LH side.
-
INSTALL FRONT DOOR SCUFF PLATE RH
Tech Tips
Use the same procedure as for the LH side.
-
INSTALL FRONT SEAT ASSEMBLY LH
-
INSTALL FRONT SEAT ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.