ROOF HEADLINING DISASSEMBLY

PROCEDURE


  1. REMOVE TELEPHONE MICROPHONE ASSEMBLY WITH MICROPHONE CASE

    Click here

  2. REMOVE VANITY LIGHT ASSEMBLY

    Tech Tips

    Use the same procedure for the RH side and LH side.


    1. B004FI5C01
      *1 Bulb Holder

      Disengage the 2 claws (A) and separate the bulb holder from the vanity light as indicated by the arrows, in the order shown in the illustration.

    2. Disengage the claw (B) to remove the vanity light assembly.

  3. REMOVE COAT HOOK

    Tech Tips

    Use the same procedure for the RH side and LH side.


    1. B004EPW

      Disengage the 6 claws and remove the coat hook.

  4. REMOVE NO. 1 ROOF WIRE (for LHD)


    1. Remove the adhesive tape from the roof headlining assembly.

      B004GPBC01
      *A w/o Sliding Roof *B w/ Sliding Roof
      *C w/o Pre-collision System *D w/ Pre-collision System
      *E w/ Rain Sensor - -
      B004FO9 Adhesive Tape - -

    2. Turn the 2 visor connectors counterclockwise approximately 45° and remove them from the roof headlining assembly.

      B004E8WC01
      *A w/o Sliding Roof *B w/ Sliding Roof
      *a 45° - -

    3. Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.

  5. REMOVE NO. 1 ROOF WIRE (for RHD)


    1. Remove the adhesive tape from the roof headlining assembly.

      B004GM2C01
      *A w/o Sliding Roof *B w/ Sliding Roof
      *C w/o Pre-collision System *D w/ Pre-collision System
      *E w/ Rain Sensor - -
      B004FO9 Adhesive Tape - -

    2. Turn the 2 visor connectors counterclockwise approximately 45° and remove them from the roof headlining assembly.

      B004E85C01
      *A w/o Sliding Roof *B w/ Sliding Roof
      *a 45° - -

    3. Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.