PTC HEATER ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT QUICK HEATER ASSEMBLY


    1. B004G0LC06
      *a

      Component without harness connected

      (Quick Heater Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      O12-1 (E) - O12-2 (B) Always Below 1 Ω
      O13-1 (E) - O13-2 (B) Always Below 1 Ω
      O12-1 (E) - O13-1 (E) Always 10 kΩ or higher

      • If the result is not as specified, replace the quick heater assembly.